SPOT ON
PIN DECK SPRAY
Prevent Pins from Sliding
Spot On creates a film to prevent pins from sliding which helps improve pin carry and eliminates off-spot pins and out-of-ranges. Cleans easily and doesn’t attract dirt to your pin deck! Use manually with your favorite spraying device!
FEATURES
Eliminate Off-Spot Pins and Out-of-Ranges
For All Types of Pin Decks
TECHNICAL
SPECIFICATIONS
One Container: 1 gallon (3.79 liters)
Packaging: One container per case
Part Number: 156-8311
Frequently ASKED QUESTIONS;
-
Only a light mist of Spot On is needed on the back two rows of the pin deck. Hold the can between the 1 pin spot and the 2-3 pin spots and point it towards the 7 pin spot. Quickly spray on a light mist going one time from the 7 to the 10 pin spots (the mist should cover the back two rows). Replace the cap after use. Allow 10 minutes for Spot On to dry before using lane or setting pins.
-
When applied, Spot On will be a milky-white color. It becomes clear when it is ready for use. The dry time will vary slightly depending on how much is applied. Typical dry time is 10 minutes when 4-5 ml of Spot On is applied. If more than 5 ml is applied, it can take up to 15 minutes for the product to dry.
-
1–2 times a week, or as needed.
-
Spot On is water soluble product, and when applied properly will not create any problems with the pinsetter or pin deck.
-
Since Spot On is water soluble it can be removed by hand with a weak dilution of cleaner and a towel.