ATLAS PRO WALKER
PRODUCTION YEARS
2024 - Current
LATEST SOFTWARE VERSION
Version: 2026.6.8.132
Fixed Issues:
Fixed issue where Atlas would allow a user to enter Reverse Drop Brush values beyond the accepted range. This could cause the calculated pattern end distance to be incorrect, requiring the user to restart the pattern design process.
Fixed issue where Atlas would not log errors in specific conditions. The issue was identified as a race condition on the controller side. This issue has been corrected to ensure errors are logged consistently.
Fixed a bug that could cause the oil head pass count to remain at 0, resulting in incorrect behavior during the load application process.
Fixed bug that prevented Atlas UI from logging out when users were disconnected.
Fixed bug that causes Atlas to lock / freeze when LED controller resets.
What’s New:
Atlas will now modify bowling center’s first reverse step when adjusting the RTF value. Ex. RTF goes from 0 to 3. The first step in reverse will be increased by 3.
The Atlas duster button can now be used to navigate the cleaner calibration process.
Press the button to cycle between Cleaner, Water, and Cleaner + Water modes.
Press and hold the button to trigger the testing procedure for the selected mode.
Audio feedback will confirm mode changes and test activation.
Added input and output states to error records.
Atlas will now have a way to load buffer speeds default values.
New feature is now implemented allowing Atlas to set a delay time after the failsafe triggers. This will allow more control over the squeegee wipe functionality in case there is a line of cleaner left on the pin deck. Increasing the delay time will make Atlas go forward that amount of time after the failsafe triggers. After the delay, Atlas will stop. The range for this adjustment is from 0 to 350 milliseconds.
Atlas will recognize changes in the approach turns and ask the user if they want to apply the same changes into the bowling center turns. If users modified CCW by -1, Atlas will ask if they want to modify every CCW in the bowling center steps by -1.
Atlas now features a Maintenance screen where key wear items are tracked. Atlas will let the user know when one of the items is near the end of its service life and needs to be replaced.
Bonus Warranty support. Atlas will now support machines with the Bonus 60 warranty program by tracking machine maintenance schedules for enrolled machines.
Added Elixir 19 support to Cleaner calibration on Atlas Pro models. Users will now have the option to select between Defense-C, Elixir 19 or Other. Depending on selection, Atlas will show different ratios that can be selected.
Added End User License Agreement (EULA) support on Atlas machines. Users will be prompted to accept or decline user agreements and terms. When users decline, Atlas will be disconnected from Wi-Fi until the user accepts the terms and agreements.
TRANSFER SYSTEM
DUO Transfer System (roller and single transfer brush)
AVAILABLE UI LANGUAGES
Arabic, Bulgarian, Chinese, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hebrew, Italian, Japanese, Korean, Malay, Norwegian, Polish, Russian, Spanish, Swedish, Thai, Turkish, Ukrainian.
Learn more about ATLAS PRO here.
ATLAS & ATLAS WALKER
PRODUCTION YEARS
2023 - Current
LATEST SOFTWARE VERSION
Version: 2026.6.8.132
Fixed Issues:
Fixed issue where Atlas would allow a user to enter Reverse Drop Brush values beyond the accepted range. This could cause the calculated pattern end distance to be incorrect, requiring the user to restart the pattern design process.
Fixed issue where Atlas would not log errors in specific conditions. The issue was identified as a race condition on the controller side. This issue has been corrected to ensure errors are logged consistently.
Fixed a bug that could cause the oil head pass count to remain at 0, resulting in incorrect behavior during the load application process.
Fixed bug that prevented Atlas UI from logging out when users were disconnected.
Fixed bug that causes Atlas to lock / freeze when LED controller resets.
What’s New:
Atlas will now modify bowling center’s first reverse step when adjusting the RTF value. Ex. RTF goes from 0 to 3. The first step in reverse will be increased by 3.
The Atlas duster button can now be used to navigate the cleaner calibration process.
Press the button to cycle between Cleaner, Water, and Cleaner + Water modes.
Press and hold the button to trigger the testing procedure for the selected mode.
Audio feedback will confirm mode changes and test activation.
Added input and output states to error records.
Atlas will now have a way to load buffer speeds default values.
New feature is now implemented allowing Atlas to set a delay time after the failsafe triggers. This will allow more control over the squeegee wipe functionality in case there is a line of cleaner left on the pin deck. Increasing the delay time will make Atlas go forward that amount of time after the failsafe triggers. After the delay, Atlas will stop. The range for this adjustment is from 0 to 350 milliseconds.
Atlas will recognize changes in the approach turns and ask the user if they want to apply the same changes into the bowling center turns. If users modified CCW by -1, Atlas will ask if they want to modify every CCW in the bowling center steps by -1.
Atlas now features a Maintenance screen where key wear items are tracked. Atlas will let the user know when one of the items is near the end of its service life and needs to be replaced.
Bonus Warranty support. Atlas will now support machines with the Bonus 60 warranty program by tracking machine maintenance schedules for enrolled machines.
Added Elixir 19 support to Cleaner calibration on Atlas Pro models. Users will now have the option to select between Defense-C, Elixir 19 or Other. Depending on selection, Atlas will show different ratios that can be selected.
Added End User License Agreement (EULA) support on Atlas machines. Users will be prompted to accept or decline user agreements and terms. When users decline, Atlas will be disconnected from Wi-Fi until the user accepts the terms and agreements.
TRANSFER SYSTEM
DUO Transfer System (roller and single transfer brush)
AVAILABLE UI LANGUAGES
Arabic, Bulgarian, Chinese, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hebrew, Italian, Japanese, Korean, Malay, Norwegian, Polish, Russian, Spanish, Swedish, Thai, Turkish, Ukrainian.
Learn more about ATLAS and ATLAS Walker here.
FLEX & FLEX WALKER
PRODUCTION YEARS
2013 - 2024
LATEST THOUGHTWARE
F2.7A
(Year Models 2013-2018)
F4.5A
(Year Models 2019-Current)
DISCONTINUED
PRODUCTION YEARS
2013 - 2024
LATEST THOUGHTWARE VERSION
Year Models 2013-2018 - F2.7A
Year Models 2019-Current - F4.5A
TRANSFER SYSTEM
DUO Transfer System (Transfer Brush & Transfer Roller)
AVAILABLE POST-PRODUCTION UPGRADES
None
IKON & IKON WALKER
PRODUCTION YEARS
Ikon - 2016 to Current
Ikon Walker - 2019 to Current
LATEST THOUGHTWARE
K3.4A
(Ikon)
IW7.2
(Ikon Walker)
PRODUCTION YEARS
Ikon - 2016 to Current
Ikon Walker - 2019 to Current
LATEST THOUGHTWARE VERSION
Ikon - K3.4A
Ikon Walker - IW7.2
TRANSFER SYSTEM
DUO Transfer System (Transfer Brush & Transfer Roller)
AVAILABLE POST-PRODUCTION UPGRADES
None
Learn more about IKON and IKON Walker lane machines here.
CROSSFIRE
PRODUCTION YEARS
2004 to Current
LATEST THOUGHTWARE
X5.3
(Crossfire with CPM2A PLC)
X5.6
(Crossfire With CP1L)
XF6.2S
(XF With CP1L & Touchscreen)
PRODUCTION YEARS
2004 to Current
LATEST THOUGHTWARE VERSION
Crossfire (with CPM2A PLC) - X5.3
Crossfire (With CP1L PLC) - XF5.6
Crossfire (With CP1L PLC & Touchscreen) - XF6.2S
TRANSFER SYSTEM
Wick Pads
AVAILABLE POST-PRODUCTION UPGRADES
8 Pad Wick & Cam Kit - 158-8214
Conditioner Tank Upgrade - 158-8215 (115V) | 158-8215E (230V)
Learn more about Crossfire lane machine here.
KUSTODIAN WALKER & WALKER SPORT
PRODUCTION YEARS
Kust. Walker - 2006 to 2008
Kust. Walker Sport - 2008 to 2013
LATEST THOUGHTWARE
ZTR4.7
(Kustodian Walker With CPM2A)
ZTR4.9
(Kustodian Walker With CP1L)
M3.3A
(Kustodian Walker Sport)
PRODUCTION YEARS
Kustodian Walker - 2006 to 2008
Kustodian Walker Sport - 2008 to 2013
LATEST THOUGHTWARE VERSION
Kustodian Walker (With CPM2A PLC) - ZTR4.7
Kustodian Walker (With CP1L PLC) - ZTR4.9
Kustodian Walker Sport - M3.3A
KUSTODIAN ION & ION SPORT
PRODUCTION YEARS
Kust. ION - 2005 to 2016
Kust. ION Sport - 2008 to 2013
LATEST THOUGHTWARE
I2.4
(ION)
M3.3A
(ION Sport)
PRODUCTION YEARS
ION - 2005 to 2016
ION Sport - 2008 to 2013
LATEST THOUGHTWARE VERSION
Kustodian ION (With CPM2A PLC) - I2.2
Kustodian ION (With CP1L PLC) - I2.4
Kustodian ION Sport - M3.3A
KUSTODIAN PLUS
PRODUCTION YEARS
2004 to 2016
LATEST THOUGHTWARE
A1
(Kustodian Plus With CPM2A)
A3
(Kustodian Plus With CP1L)
PRODUCTION YEARS
2004 to 2016
LATEST THOUGHTWARE VERSION
Kustodian Plus (With CPM2A PLC) - A1
Kustodian Plus (With CP1L PLC) - A3
PHOENIX-S – Model C
PRODUCTION YEARS
2001 to 2005
LATEST THOUGHTWARE VERSION
Phoenix-S Model C - S3008
STANDARD ELITE
PRODUCTION YEARS
2001 to 2005
LATEST THOUGHTWARE VERSION
Standard Elite - SE1010 ?
SANCTION STANDARD
PRODUCTION YEARS
1999 to 2002
LATEST THOUGHTWARE VERSION
Sanction Standard - S3008 or VB818
PHOENIX-S – Model A & B
PRODUCTION YEARS
1995 to 2001
LATEST THOUGHTWARE VERSION
Phoenix-S Model A & B - ST2009